Contact Us
- Room 405-2, Xinglian Building, No.151 Xinsha Road, Shangxing Community, Xinqiao Street, Bao'an District, Shenzhen, China
- cindy@yatfeimould.com
- +86-18825735126
-
01/Apr
2025
How to design a good injection mold cooling system to improve the production ...
We shown you In the following mold It's a multi-cavity mold, we have designed reasonable cooling water for cavity ,core and mold base, in order to confirm that the mold has bee
-
28/Jun
2022
Effect of residual thermal stress on warping deformation of injection products
1）The influence of residual thermal stress on warpage deformation of the products During the molding process of the plastic melt, due to the uneven orientation and shrinkage, the i
-
20/May
2022
Principle of injection molding parts
High precision injection parts processing advantages, widely applicable to all kinds of injection products, including structural parts, appearance parts, etc.
-
10/Apr
2022
Maintenance method of mold parts
Check whether there is an early warning rust or damp phenomenon at the air diffuser. If you find rust or moisture near the hot runner vent, it means there is condensation inside, o
-
09/Apr
2022
Must-have features of mold accessories
When the blank is plastically deformed in the mold cavity, it both flows and slides along the surface of the cavity, causing severe friction between the surface of the cavity and t
-
08/Apr
2022
Stamping Safety Production
In the case of producing dozens or hundreds of stamping parts per minute, the processes such as feeding, stamping
-
07/Apr
2022
Stamping lubrication work
Generally, during the stamping process of the workpiece, since the temperature will rise rapidly during the stamping process
-
06/Apr
2022
The main material of stamping
The surface and intrinsic properties of the sheet metal used for stamping have a great influence on the quality of the stamped product.
-
05/Apr
2022
Stamping process classification
Stamping is mainly classified according to the process, which can be divided into two categories: separation process and forming process.
-
04/Apr
2022
Stamping Solutions
In the past, in the production of deep-drawn or heavy-drawn workpieces, everyone thought that pressure-resistant (EP) lubricants were the best choice for protecting molds.
-
03/Apr
2022
Stamping problems
The molds used in stamping processing are generally specialized. Sometimes a complex part needs several sets of molds to be processed and formed
-
02/Apr
2022
The advantages of stamping
Because stamping has such advantages, stamping processing is widely used in various fields of the national economy.