Rust is a common problem in mold production, and its thimble and cylinder are more likely to rust. When the plastic mold parts factory finds that the thimble is rusty, if it is not treated, its service life will be consumed quickly and become not durable. So when the thimble rusts, what should the plastic mold parts factory do? What's the right thing to do?
1. When the plastic mold parts factory produces plastic molds, the thimble rusts. A large part of the reason is water injection. It is impossible for the machine to stop running and turn off the water. Improper operation can easily cause the thimble to rust. The correct method should be to turn off the water and turn off the machine, so it can effectively prevent corrosion.
2. If the thimble is used correctly, it will be difficult to rust. When the thimble stops using, we should also take measures to protect the thimble and use antirust oil or engine oil for antirust treatment.
3. If the thimble of the plastic mold parts factory is rusty and there is only a small amount of rust, the rust can be removed through copper wire or grindstone processing. However, if the rust is serious, replace the thimble in time to keep your mold in good working condition
